|
|
 |
SG Series
General purpose helical gear pump |
| Model |
SG
050 |
SG
075 |
SG
100 |
SG
125 |
SG
150 |
SG
200 |
SG
250 |
SG
300 |
| Size |
1/2" |
3/4" |
1" |
11/4" |
11/2" |
2" |
21/2" |
3" |
| Capacity |
20 |
30 |
50 |
75 |
110 |
200 |
350 |
500 |
 |
- Port size BSP Threaded
- Capacity in LPM AT 1440 rpm
- Max. operating pressure 10 kg/cm2
- Operating Temp. 80°c.Optional High Temp version upto 250°c.
- Sealing oil seal. Gland packaging optional
- Bearing type - Ultra bronze bush
- MOC - CI/MS , CI/SS
|
SGX Series
Special flange mounting type gear pump |
| Model |
SGX
050 |
SGX
050 |
SGX
075 |
SGX
100 |
SGX
125 |
SGX
150 |
SGX
200 |
SGX
250 |
SGX
300 |
| Size |
1/4" |
1/2" |
3/4" |
1" |
11/4" |
11/2" |
2" |
21/2" |
3" |
| Capacity |
2.5
5 |
10
15 |
20
25 |
35
50 |
60
75 |
100
125 |
150
200 |
300
350 |
415
500 |
 |
- Port size BSP Threaded
- Capacity in LPM AT 1440 rpm
- Max. operating pressure 12 kg/cm2
- Operating Temp. 80° c. Optional High Temp version upto 250° c.
- Sealing oil seal. Gland packaging optional
- Bearing type - Ultra bronze bush
- MOC - CI/MS , CI/SS
|
SS Series
Investment cast complete SS gear pump |
| Model |
SS
050 |
SS
100 |
SS
150 |
SS
200 |
SS
250 |
| Size |
1/2" |
1" |
11/2" |
2" |
21/2" |
Capacity
(LPM) |
20 |
50 |
75
100 |
150
200 |
300
350 |
 |
- All SS pump for handling corrective liquids,
acids, dyes, printing inks, food products etc.
- Capacity in LPM at 1440 RPM.
- Max. operating pressure 10 kg/cm2
- Max. operating temp. 250° c.
- Investment Cast body & covers
- All welded parts in MOC of SS-316, 316L, 304
- Shaft supported on lgus polymer bushes or PTFE coated DU bushes
- Sealing with PTFE gland or Z-pack sealant
- Special pump for food grade application with FDA approved sealing
- Supported with L type bracket for foot mounting.
|
AFP Series Fuel
Pressurising internal gear pump |
| Model |
AFP -050 |
AFP -075 |
| Size |
1/2" |
3/4" |
| Capacity |
150/300/450/600 |
1000/1500/2000/2500 |
 |
- Fuel Pressurising internal gear pump for handling
LDO/ FO /LSHS / HSD/ Lube oil.
- Investment cast body and covers. Built in pressure
relief valve and capacity by-pass outlet.
- Capacity in LPH AT 1440 RPM
- AFP 050 model are also recommended for use at 2900
RPM to get higher capacity
- Max. operating pressure 35 kg/cm2
- Sealing with mech.. seal
- Supported with CI bracket for foot mounting.
|
AENX Series Heavy duty gear pump with needle
bearings |
| Model |
AE
050 |
AE
100 |
AE
150 |
AE
200 |
AE
250 |
AE
300 |
AE
400 |
AE
500 |
AE
600 |
| Size |
1/2" |
1" |
11/2" |
2" |
21/2" |
3" |
4" |
5" |
6" |
| Capacity |
0.5/1/1.5 |
2/2.5/3 |
5/6/7.5 |
9/12 |
15/20 |
25/30 |
40/50 |
60/75 |
100/125 |
 |
- Double helical gear pump with Flanged connections
- Shaft supported on needle roller bearings
- Choice of self or independent lubrication of
bearings
- Recommended for heavy duty application of handling
petroleum products add viscous liquids
- Wide capacity range and
- Provision for fittment of mech. seal.
- MOC - CI/CS/SS
- Facility for steam jacketting
- Sealing arrangement - oil seal / glandpacking /
mech. seal
- Capacity in m3 /hr at 1440 RPM
- Operating Pressure upto 25 kg/cm2
- Max. Temp upto
250° c.
- Flanged connection in BS / ANSI / ASA
For detailed technical literature / Catalogue please, write ,mail or fax us. Fill
in the Enquiry form to enable us to suggest a suitable pump to your application.
|
|
|
